The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] C80 to E80 coversion

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] C80 to E80 coversion
05-29-20, 09:35 AM (This post was last modified: 06-09-20 02:35 AM by Tom - Raymarine - Moderator.)
Post: #1
markbowden93@gmail.com Offline
Junior Member
**
 		Posts: 1
Joined: May 2020
Reputation: 0
[TG11] C80 to E80 coversion
Hello,

I had to upgrade from a C80 MFD due to screen failure. I have a refurbed E80 installed and it functions fine. However it came with a Seatalk2 pig tail. My boat is a 2006 Silverton with a Seatalk network.

My question is, is there a 6 pin seatalk alarm cable for the E80 available that has the flat 3 pin end on it? Or is there a E80 6-pin sealtalk cable that has a "flat" 5 pin end available? Would that cable work?
If so what is the part number to order?

Or would a Seatalk2 cable with the "rectangular" 5 pin work? The seatalk junction block that is installed on my boat is the rectangular 5 pin style but all the other devices like the ST60 depth/speed unit plug into the block with the 3 pin cables.
If so what is the part number to order?

Any assistance is appreciated. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] C80 to E80 coversion - markbowden93@gmail.com - 05-29-20 09:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication