replacing st 40 depth and wind and also st50 speed

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Chuck,

It is indeed possible to interface a Rotavecta wind transducer to an i60 Wind Instrument and then calibrate the wind transducer. It is additionally possible to interface the depth and speed/temp transducers from ST50 instruments to i50 instruments. As the ST50 depth and speed/temp transducer cables were terminated with plugs rather than bare leads, these plugs will need to be removed, 1/8" female blade connectors will need to be attached to the transducer leads, and then the transducer leads will be connected to the matching colored terminals of the i50 instruments.