Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade
04-03-17, 09:45 AM (This post was last modified: 04-03-17 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #16
RE: Upgrade
Brian,

Have you use the Data Sources feature (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES) on the Data Master MFD to configure the system to utilize GPS data from the Raystar 130 GPS Sensor rather than the internal GPS receivers within the MFDs? Please click here to view a FAQ addressing Data Source Selection. Should source selection be blocked, then it is recommended that the third party devices be temporarily disconnected from the SeaTalkng backbone until Data Source selection for GPS data has been completed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade - mpo881 - 11-15-16, 03:21 PM
RE: Upgrade - mpo881 - 11-16-16, 09:38 AM
RE: Upgrade - mpo881 - 11-16-16, 04:42 PM
RE: Upgrade - mpo881 - 02-16-17, 06:24 PM
RE: Upgrade - mpo881 - 02-20-17, 07:10 PM
RE: Upgrade - mpo881 - 02-21-17, 03:24 PM
RE: Upgrade - mpo881 - 02-27-17, 03:40 PM
RE: Upgrade - mpo881 - 04-01-17, 09:02 AM
RE: Upgrade - Chuck - Raymarine - Moderator - 04-03-17 09:45 AM
RE: Upgrade - mpo881 - 04-03-17, 02:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)