Raymarine forum / Raymarine Forums / Multifunction Displays v / Connecting e127 to a98, which will replace an L750

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting e127 to a98, which will replace an L750
11-16-16, 01:47 PM (This post was last modified: 11-16-16 02:08 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting e127 to a98, which will replace an L750
Welcome to the Raymarine Forum On Time,

Q1) The L750 head unit is mounted as was recommended per its instructions. Will the a98 fit the same [censored] without modification? If mod is needed what would it be?
A1) Raymarine's a/c/e/eS/gS-Series MFDs are not designed to exactly fit within the footprint of any products which preceded these MFDs. The a98 MFD's mounting template including cutout and footprint information may be found within the a9x MFD Mounting Template. Similarly, the L750's mounting template including cutout and footprint information has been attached to this response.


Attached File(s)
.pdf  Pathfinder-L750 Mounting Template.pdf (Size: 40.86 KB / Downloads: 280)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting e127 to a98, which will replace an L750 - Chuck - Raymarine - Moderator - 11-16-16 01:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication