[CA] [CA11] i60 wind to Seatalk1

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Kim,

As far as connecting the transducer to an i50/i60 instrument, i50/i60 instruments are plug and play with respect to replacing a ST60/ST60+ instrument. While i50/i60 instruments are designed to support either SeaTalk or SeaTalkng / NMEA 2000 communications, they feature a pair of sockets which are designed to accept a SeaTalkng Spur Cable rather than a SeaTalk 3-pin press fit plug. Raymarine offers the A06047 400mm Adapter Cable to permit i50/i60 instruments to be connected to closely located products having a SeaTalk 3-pin press fit socket. For devices supporting SeaTalk communications which are located further away, the A06047 400mm Adapter Cable may be connected to a D244 SeaTalk Junction Block to which the cable having SeaTalk 3-pin press fit plug (currently connected to the ST60/ST60+ instrument's SeaTalk socket) may then also be connected.