Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] DSM300 Power Supply

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DSM300 Power Supply
01-07-19, 12:11 PM (This post was last modified: 01-07-19 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] DSM300 Power Supply
Welcome to the Raymarine Forum Lee,

The DSM300 will indeed continue to draw power when the system's MFDs are switched OFF. While the MFD can control whether the fishfinder sonar module is pinging (a higher power state), it is not capable of controlling the power state of a fishfinder sonar module. As you have suggested, it is recommended that fishfinder sonar modules be powered from dedicated switched power circuit. Please click here to view a FAQ addressing power circuits for marine electronics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DSM300 Power Supply - hadjiosif - 01-07-19, 10:05 AM
RE: [CA11] DSM300 Power Supply - Chuck - Raymarine - Moderator - 01-07-19 12:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication