Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adding RMK-10 Keyboard to two axiom 9’s already networked.
02-25-19, 11:37 AM
Post: #2
RE: [CA11] Adding RMK-10 Keyboard to two axiom 9’s already networked.
Welcome to the Raymarine Forum Wstandis,

The RMK-9/10 Remote Keyboards are designed to communicate with compatible MFDs via Ethernet communications. Axiom MFDs each feature a single Ethernet Network (RayNet) communications interface, permitting them to be interfaced to one other compatible device having an Ethernet Network communications interface. Should the MFD need to be interfaced to additional devices having an Ethernet Network communications interface (ex. RMK-9/10), then a HS5 RayNet Network Switch will need to be installed within the system. After doing so, the Ethernet Network (RayNet) communications interface of each MFD and RMK-9/10 would be interfaced to the HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Adding RMK-10 Keyboard to two axiom 9’s already networked. - Chuck - Raymarine - Moderator - 02-25-19 11:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)