Stand Alone RS130

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Stand Alone RS130

05-10-16, 12:05 PM (This post was last modified: 05-12-16 10:57 AM by Chuck - Raymarine - Moderator.)

Post: #3

dprice@plugnpay.com Offline

Junior Member

Posts: 12
Joined: May 2016
Reputation: 0

RE: Stand Alone RS130

I did drag the sensor approx. 10' from house onto my lawn (facing south) and it did sit there for an hour or so. I will try to drag it further out.
I tried to power through the ST1 as I read the bus should only be powered from one side and I didn't have enough STng ports to power and interface to the NMEA port of the multiplexor. I have several more STng cables and connectors ordered so I will try again after I have the additional components.

Thank you for your feed back.

« Next Oldest | Next Newest »

Messages In This Thread

Stand Alone RS130 - dprice@plugnpay.com - 05-10-16, 09:19 AM

RE: Stand Alone RS130 - Chuck - Raymarine - Moderator - 05-10-16, 11:53 AM

RE: Stand Alone RS130 - dprice@plugnpay.com - 05-10-16 12:05 PM

RE: Stand Alone RS130 - Chuck - Raymarine - Moderator - 05-12-16, 11:01 AM

RE: Stand Alone RS130 - dprice@plugnpay.com - 05-16-16, 07:24 PM

RE: Stand Alone RS130 - Chuck - Raymarine - Moderator - 05-17-16, 07:37 AM

User(s) browsing this thread: 1 Guest(s)