Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] do i still need P70 when I install ACU-100 with EV1 and EV100 tiller drive

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] do i still need P70 when I install ACU-100 with EV1 and EV100 tiller drive
04-30-19, 05:53 AM (This post was last modified: 04-30-19 08:41 AM by Chuck - Raymarine - Moderator.)
Post: #3
ray18 Offline
Member
***
 		Posts: 91
Joined: Feb 2017
Reputation: 0
RE: [CA11] do i still need P70 when I install ACU-100 with EV1 and EV100 tiller drive
ok, thanks. yes My baystar Hydraulic steering for my main outboard Johnson 90 hp has a 118.6 cc steering RAM so I need EV150 with steering pump for autopiloting my Johnson 90.

The reason I am looking to use this application is with Honda 8 hp disconnected from my Johnson 90 outboard. So, the autopilot system will be used only to steer the kicker motor without linking the Johnson 90.

I see I can buy ST1000 to autopilot my Honda 8 hp without liking the Johnson 90 for trolling at slow speed like under 5 nautical miles an hour. But, what cable do I use to link ST1000 to Raymarine Axiom 9" MFD? or is that even possible to connect Axiom to ST1000 to autopilot my Honda 8 hp independently?
http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] do i still need P70 when I install ACU-100 with EV1 and EV100 tiller drive - ray18 - 04-30-19 05:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication