Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Integrating a 250 AIS
04-29-19, 12:17 PM (This post was last modified: 11-25-19 10:04 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Integrating a 250 AIS
Welcome to the Raymarine Forum Tim,

Per the FAQ found here, AIS receivers or AIS transceivers must be interfaced to the MFD's NMEA 0183 port (See the wiring chart below).

[Image: attachment.php?aid=2924]

The NMEA 0183 output terminals of the SHS may be interfaced to the MFD's NMEA 0183 Port #2 Input leads.


Attached File(s) Thumbnail(s)
   
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 04-29-19 12:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us