The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] EV-1 Error Code "No Seatalk"
06-29-19, 02:47 PM (This post was last modified: 07-04-19 01:13 AM by Tom - Raymarine - Moderator.)
Post: #1
EV-1 Error Code "No Seatalk"
Just completed my installation of EV-1, ACU-100, P70 and wheel drive. Seems to boot up OK, but the EV-1 gives error code in red: Two quick flashes, long off, repeated, apparently indicating no SeaTalk connection.
The ACU-100 gave similar code (green dash-dot-dot, repeated, but after a couple of minutes it went to solid green, but the EV-1 code doesn't correct. I've checked all connections and re-plugged them numerous times but can't find anything obvious. The P70 scrolls though most functions but gives "No Pilot" message. Didn't check voltage but almost certainly not the problem since everything seems to power on OK and batteries were at full or near-full charge and being fed by solar charger which means the autopilot was probably seeing about 13.6.
Any ideas?
Thanks!
John
Bristol 29.9 "Thunder Mist"
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV-1 Error Code "No Seatalk" - VT2C - 06-29-19 02:47 PM
RE: EV-1 Error Code "No Seatalk" - VT2C - 07-05-19, 05:31 AM
RE: EV-1 Error Code "No Seatalk" - VT2C - 07-10-19, 08:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)