[CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

08-12-19, 01:04 PM

Post: #3

Dustdevil Offline

Junior Member

Posts: 3
Joined: Jun 2018
Reputation: 0

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

I figured out the issue I was having...The Tridata (and I think any depth/speed/wind etc.) is default set to master in the setup menu. Since i was using an ITC-5, it needed to be set to repeater.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Dustdevil - 07-30-19, 09:20 AM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Chuck - Raymarine - Moderator - 08-02-19, 10:52 AM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Dustdevil - 08-12-19 01:04 PM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Chuck - Raymarine - Moderator - 08-20-19, 10:25 AM

User(s) browsing this thread: 1 Guest(s)