European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[TG] [TG11] Smartpilot S1 and Axiom 9 RV
|
|
05-13-20, 01:43 AM
Post: #2
|
|||
|
|||
|
RE: [TG11] Smartpilot S1 and Axiom 9 RV
Hello Bill,
Has your S1's display failed too, not just the pump? The S1 requires a dedicated pilot display, you cannot use just the Axiom as you can with a modern Evolution pilot. The limiting factor here is the S1's software. You can replace the S1's ST6002 with a p70S or p70RS. Connect on direct Seatalk1 through an A06047 (400mm) or A06073 (1m) adaptor cable, not via a Seatalk1-SeatalkNG convertor. You can connect the Axiom to the pilot's ST1 via a convertor (parts E22158 + A06045 400mm or A06075 1m Devicenet-STNG adaptor) and this will offer pilot waypoint navigation (Track mode), but not control. You still need the ST6002/p70S/p70RS. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] Smartpilot S1 and Axiom 9 RV - unixdood - 05-09-20, 10:59 AM
RE: [TG11] Smartpilot S1 and Axiom 9 RV - Tom - Raymarine - Moderator - 05-13-20 01:43 AM
RE: [TG11] Smartpilot S1 and Axiom 9 RV - unixdood - 05-14-20, 06:19 AM
|
User(s) browsing this thread: 1 Guest(s)