Raymarine forum / Raymarine Forums / Instruments v / DST800 with iTC-5 and e7D no speed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DST800 with iTC-5 and e7D no speed
08-04-16, 02:21 PM
Post: #5
Mark - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 107
Joined: Feb 2016
Reputation: 1
RE: DST800 with iTC-5 and e7D no speed
Okay, on the iTC-5 if you remove the green wire from the speed temp connection, and then power up the system, what does the speed box display?
3 dashes --- or zero 0.0?
When you say your temp is good, is it reading correctly?
Is the DST800 your only transducer source for temp?
What is model number of the DST800?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-04-16 02:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication