Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer
06-06-17, 12:52 PM (This post was last modified: 06-06-17 01:11 PM by Chuck - Raymarine - Moderator.)
Post: #15
justinJPW Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2017
Reputation: 0
RE: Interface EV-100 Sail to Raymarine wind transducer
Hey Chuck

I spoke with your colleague Marc about the process to operate the EV-100 Sail - Autopilot by wind direction rather than by compass course. He provided me a simple 3 step process as follows:

On autopilot instrument P70
Step 1
MENU
Setup/Autopilot calibration/Vessel Settings/Hull type/SAIL
DOUBLE CHECK that SAIL is selected

Step 2
MENU
Mode/WindVane/SELECT
You should see immediate reaction - start to turn rudder
Now the autopilot will steer to wind direction.

Step 3
To AutoTack
press +10 & +1 at the same time to tack to STARBOARD
press -10 & -1 at the same time to tack to PORT

Thanks for your help - I'll wait for this nor'easter to blow away the rain and get out to try it!

Thanks

jp
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interface EV-100 Sail to Raymarine wind transducer - justinJPW - 06-06-17 12:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication