Axium transducer

[Chuck - Raymarine - Moderator]

qbayle,

Q1.the chirp conical sonar cone angle is terribly small and the 200khz suits my needs much better with a wider angle and way better tracking and marking targets at speed so I need to understand how to get 50/200 to an axiom display. I see a Y cable listed, can I just use that for the 3d and p58 transducers?
A1. Please click here to view a FAQ addressing this subject. If seeking to use both a RealVision 3Dâ„¢ transducer and the P58 transducer with an AXIOM RV MFD, then the A80491 Axiom RV to 25-pin RV & 7-pin Embedded Transducers Y-Cable would be used.

Q2. when lighthouse 3 comes out for my a98 and c97 units will the a98/c97 when paired with a m100 be able to do the "clear cruise" or will that only work on the axioms?
A2. It is currently expected that the Clear Cruise feature will be supported within the initial release of LightHouse 3 software for the a/c/e/eS/gS-Series MFDs. Those seeking more information about FLIR's M100 may click here to view more information about this marine thermal camera.