Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST50 & ST60 Dimensions/Footprint
03-04-17, 01:34 PM
Post: #1
ST50 & ST60 Dimensions/Footprint
I have an opportunity to purchase a NavPod pre-cut to fit four ST60 instruments. I have ST50 instruments in my present NavPod which is a little worse for wear. Will my ST50 set fit in the cutouts for the ST60?

Cheers

Bob

Lazybones
1999 Catalina 36 MkII
EGYC, RI
Find all posts by this user
Quote this message in a reply
03-07-17, 11:35 AM
Post: #2
RE: ST50 & ST60 Dimensions/Footprint
Welcome to the Raymarine Forum Bob,

The ST50/ST50+ Instrument and ST60/ST60+ Instruments designed to occupy the same footprint and circular surface mount cut-out.
Find all posts by this user
Quote this message in a reply
03-14-17, 04:10 PM (This post was last modified: 03-15-17 07:56 AM by Dave - Raymarine - Moderator.)
Post: #3
RE: ST50 & ST60 Dimensions/Footprint
Thanks, Chuck! That's excellent news!

I've been digging through these forums and am amazed at the sheer volume of information.

This spring, I'll be installing my A98 in a NavPod and changing the existing one for the instruments. Since I'll have the whole thing apart, I'm going to hook up SeaTalk and install AIS as well.

Again, thanks for the help.

Cheers

Bob
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)