Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Xducer connectors for instruments, iTC-5, and retired autopilots
03-21-17, 03:59 PM (This post was last modified: 03-21-17 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
Xducer connectors for instruments, iTC-5, and retired autopilots
Xducer connectors for instruments, iTC-5, and retired autopilots

Raymarine instrument displays (ex. i40/i50/i60, ST40, ST60/ST60+, etc.), iTC-5 Analog Instrument Transducer Converter, and some retired autopilots (ex. ST4000/ST4000+, ST5000/ST5000+, etc.) feature 1/8" male blade terminals to which transducers and/or NMEA 0183 cables would be connected. To connect transducer leads or NMEA 0183 leads to these terminals, 1/8" female blade connectors must be crimped onto the leads. Such connectors are typically included with the instrument, iTC-5, or autopilot purchased. These connectors may be purchased separately, and the part number for a package of eleven 1/8" female blade connectors is Q085. Please click here to view a FAQ addressing where one may purchase parts for Raymarine products.


RAYFAQ#
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)