[CA] 3 Transducers with two Axiom pros

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mike,

While 1kW CHIRP transducers may be interfaced to an Axiom Pro RVX MFD, they may not be interfaced directly to an Axiom Pro S MFD. Should it be desired to install an additional 1kW CHIRP transducer onboard the vessel, then the transducer would need to be interfaced to one of the following, which in turn would be interfaced via Ethernet to the other Axiom MFDs:
- another Axiom Pro RVX MFD
- a CP470 CHIRP Sounder Module
- a CP570 CHIRP Sounder Module

When so interfaced, it would indeed be possible to simultaneously view sounder imaging from any Axiom MFD within the system. With regard to interference between the transducers, while both transducers will be chirping in the same range of frequencies, they should rarely be in sync. Accordingly, any interference would be expected to be minimal.