Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Airmar UST800 experiences
05-03-18, 03:22 PM (This post was last modified: 05-03-18 03:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Airmar UST800 experiences
Welcome to the Raymarine Forum primemeridian,

Q1) Does the UST800 really fits perfectly in the ST800 housing without leaks?
A1) The UST800 is not a Raymarine product ... it is manufactured by Airmar, Inc., as is the ST800 housing. It is recommended this question be addressed to Airmar, Inc. ((603) 673-9570).

Q2) Should I just connect the UST800 directly to the SeaTalk network, skipping the iTC-5?
A2) The processor box of the UST800 features a NMEA 2000 communications interface and as such, would simply be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.

Q3) Will the I70s just work and recognize the new transducer?
A3) The i70/i70S will simply repeat data from the UST800. The i70/i70S does not support speed or temperature calibration of this transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Airmar UST800 experiences - Chuck - Raymarine - Moderator - 05-03-18 03:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)