Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C70 Fuel Monitoring
05-14-18, 05:16 PM
Post: #1
C70 Fuel Monitoring
I have the Fox Marine Engine Gateway networked to my C70 Chartplotter classic. Is there a way to enter the Fuel for the Tank so it can track how much is used?
Find all posts by this user
Quote this message in a reply
05-16-18, 12:11 PM
Post: #2
RE: C70 Fuel Monitoring
Welcome to the Raymarine Forum Brad,

Unlike later MFDs designs which run LightHouse II or LightHouse 3 software, the A/C/E-Series Classic MFDs, G-Series systems, and C/E-Series Widescreen MFDs did not support a Fuel Management feature. These MFDs were designed to report exclusively report tank levels from NMEA 2000 tank level sensors.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-16-18, 04:34 PM (This post was last modified: 05-16-18 08:22 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: C70 Fuel Monitoring
Thanks for the reply. Thinking of upgrading, since Fuel Management was the primary reason I installed the Fox-Marine Monitor.
Find all posts by this user
Quote this message in a reply
05-16-18, 08:27 PM
Post: #4
RE: C70 Fuel Monitoring
Brad,

The Fuel Manager feature of MFDs running LightHouse II and LightHouse 3 software is indeed great. With the Fox Engine Gateway and my MFDs running LightHouse II software, I amaze them at the fuel dock by usually being within a few tenths of a gallon in guessing how much fuel will be required to top off the tank.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us