Problems with SmartPilot X30 Course computer

[Steve - Raymarine - Moderator]

Unfortunately it is pointing toward the X30 Seatalk board then, one other check to determine it is not the control head or another Seatalk device connected. Power down the X30 and disconnection the modular green connector on the Seatalk ports, then power up. If the fault LEDs come on, then it will confirm the Seatalk board within the X30 course computer and I would recommend that the course computer be sent to the below address to be evaluated by a service technician for repair.

Raymarine Service Center
9 Townsend West
Nashua, NH 03063

Include in the box:
Name
Daytime Phone
Return address
Brief description of the issue