Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Autotack user cal on ST6002 SmartPilot Controller
07-21-18, 03:00 PM (This post was last modified: 07-27-18 12:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Autotack user cal on ST6002 SmartPilot Controller
Good Morning or Afternoon,

I am having trouble setting up my Autotack angle on my ST6002 SmartPilot Controller. I would like to specify a specific angle, rather than use the
Relative Tack option. Currently, I appear stuck on rEL (Relative Tack) and cannot get the display to change. I have tried both the user cal and dealer cal pages.

My system info: ST6002 Smartpilot. Version 5.0. X30 I20. 01696 hours. Two stickers on the unit: 1) E12098-P 1190171 and 2) 5624-010 41266140

Thanks in advance for you help!

David Tye
Find all posts by this user
Quote this message in a reply
07-25-18, 10:28 PM (This post was last modified: 07-27-18 12:29 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Autotack user cal on ST6002 SmartPilot Controller
Hello David,

Sorry for the delay replying.

This, I'm sorry to say, an SPX pilot limitation: the SPX pilots didn't support a manual/fixed tack angle. There was an error in the handbook that said that they did (I have a feeling that that was corrected in a later issue of the handbook, but haven't checked back.)

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-27-18, 09:35 AM (This post was last modified: 07-27-18 12:29 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11[ Autotack user cal on ST6002 SmartPilot Controller
Thanks Tom, appreciate the response and information...

David
Find all posts by this user
Quote this message in a reply
07-29-18, 09:02 PM
Post: #4
RE: [TG11] Autotack user cal on ST6002 SmartPilot Controller
No problem.
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us