Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RADAR overlay on C Series
10-22-18, 03:13 PM
Post: #2
RE: [CA11] RADAR overlay on C Series
Welcome to the Raymarine Forum Max Bottomtime,

As you have suggested the C-Series Classic MFD v5.16 software requires that the MFD be interfaced to a source of heading data when seeking to use the software's radar overlay feature. Should the software of the C-Series Classic MFD be downgraded to v4.30, then the MFD will support radar overlay with the support of either heading or COG. The link to the v4.30 C-Series Classic MFD software update may be found within the software history table of the C-Series Classic MFD software update web page. When using the currently available Navionics cartography, it is recommended that the MFD be operating with v5.16 C-Series Classic MFD software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] RADAR overlay on C Series - Chuck - Raymarine - Moderator - 10-22-18 03:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)