Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] In hull shoot thru xducer for eS78
04-02-19, 05:20 PM (This post was last modified: 04-03-19 09:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] In hull shoot thru xducer for eS78
I recently purchased an eS78 and want to use an in-hull shoot thru transducer. What model transducer would I use and do I need any additional adapter cables??
My hull is not cored, solid glass.

Thank You,
Find all posts by this user
Quote this message in a reply
04-03-19, 09:44 AM
Post: #2
RE: [CA11] In hull shoot thru xducer for eS78
Welcome to the Raymarine Forum Berettadog,

Please click here to view a FAQ addressing this subject. Should a CPT-S transducer not be acceptable, then the following other options may be considered:

- for those not seeking fishfinder features and only seeking to add numerical depth information within the system, consider interfacing the MFD to an i70 MFID and a T70278 P79S Smartâ„¢ Transducer to the system

- for those seeking to add 50kHz/200kHz fishfinder features to the system, consider interfacing the MFD to a CP370 fishinder sounder module with an E66008 P79 Fishfinder Transducer to the system. For those seeking better 50kHz/200kHz fishfinder performance consider use of an A66089 M260 transducer with the CP370.

- for those seeking high power CHIRP sonar features, consider interfacing the MFD to a CP470/CP570 CHIRP Sonar Module with a compatible in-hull CHIRP transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)