Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine chart plotters and Noaa map compatibility.
04-29-19, 05:54 PM (This post was last modified: 04-30-19 12:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine chart plotters and Noaa map compatibility.
Hello everyone, I'm looking to upgrade plotters on a sailboat and would like to know which, if any, Raymarine plotters can use stock NOAA ENC charts?
Find all posts by this user
Quote this message in a reply
04-30-19, 12:48 PM
Post: #2
RE: [CA11] Raymarine chart plotters and Noaa map compatibility.
Welcome to the Raymarine Forum Niiiad,

Raymarine's MFDs which are designed for use with LightHouse 3 software (Axiom/Axiom Pro/Axiom XL MFDs and eS/gS-Series MFDs), LightHouse II software (a/c/e/eS/gS-Series MFDs), and Element chartplotter fishfinders are all designed to utilize NOAA ENC charts which have been reformatted (LightHouse NOAA ENCs) for use with these products. The entire chart set for the US east coast (to include the Gulf of Mexico and Great Lakes) would likely cost less than a typical lunch at McDonalds. No Raymarine products are designed to support NOAA ENC charts in their native format.
Find all posts by this user
Quote this message in a reply
04-30-19, 01:27 PM (This post was last modified: 04-30-19 03:18 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Raymarine chart plotters and Noaa map compatibility.
Thanks for the quick answer.
Find all posts by this user
Quote this message in a reply
04-30-19, 03:18 PM
Post: #4
RE: [CA11] Raymarine chart plotters and Noaa map compatibility.
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)