Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] DSM300 issues
06-24-19, 09:17 AM (This post was last modified: 06-24-19 03:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] DSM300 issues
I have a boat with a E120 classic and DSM300 with a airmar p317 transducer.
The DSM LED doesn't indicate any problems and flashes green once every second or so unless I unplug the transducer.
problem is that on the fish finder screen, it doesn't display depth or show the bottom.
any ideas?
Find all posts by this user
Quote this message in a reply
06-25-19, 09:45 AM
Post: #2
RE: [DG11] DSM300 issues
Hi Manuel,

Thank you for your enquiry

Is there a warning displayed on the E120? for example no Data source? If yes, then the problem is communications between the E120 classic and the DSM300, could be a damaged cable, poor connection or maybe fault I/O interface inside the DSM300 or the E120 - in which case the DSM or the E120 will need to be returned to our service workshops for investigation and repair.

Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us