Raymarine forum / Raymarine Forums / AIS v / [TG] AIS 700 data to VHF transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] AIS 700 data to VHF transceiver
01-17-20, 04:17 PM (This post was last modified: 01-19-20 07:19 PM by Tom - Raymarine - Moderator.)
Post: #1
grayson Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2020
Reputation: 0
AIS 700 data to VHF transceiver
What data is transferred from AIS 700 and does it support latitude and longitude that can be used on VHF Transceivers
Find all posts by this user
Quote this message in a reply
01-19-20, 07:22 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: AIS 700 data to VHF transceiver
Hello Grayson,

Raymarine AIS transceivers don't output position data by default. It is possible to enable output via NMEA0183 in the ProAIS2 software but we recommend not doing so, in part because this GPS source doesn't take part in our 'multiple data source selection' process. We would always recommend using a dedicated navigational GPS receiver.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication