Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] St8001 vs ST8002

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] St8001 vs ST8002
01-25-20, 06:33 PM (This post was last modified: 01-27-20 04:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
gecsr1 Offline
Junior Member
**
 		Posts: 3
Joined: Sep 2019
Reputation: 0
[CA11] St8001 vs ST8002
What is the difference between the ST8001 and St8002 ?
Find all posts by this user
Quote this message in a reply
01-27-20, 04:23 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] St8001 vs ST8002
Welcome to the Raymarine Forum gecsr1,

The ST8001 and ST8002 differed only in their aesthetics. The ST8001 featured hard edges, while the ST8002 featured softened/rounded edges to better match the aesthetics C/E-Series Classic MFDs.
Find all posts by this user
Quote this message in a reply
06-02-20, 04:13 PM
Post: #3
gecsr1 Offline
Junior Member
**
 		Posts: 3
Joined: Sep 2019
Reputation: 0
RE: [CA11] St8001 vs ST8002
will the st8001 work / operate with a X10 autpilot computer ?
Find all posts by this user
Quote this message in a reply
06-11-20, 01:22 PM
Post: #4
Chris - Raymarine - Moderator Offline
Senior Member
****
 		Posts: 266
Joined: May 2016
Reputation: 0
RE: [CA11] St8001 vs ST8002
The ST8001 will work with a x10 course computer. Please be advised parts are no longer available for it. Should you need a controller for a X10 we would recommend a p70s or a p70r,
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication