[CA] [CA11] Rv220 and b175m together on axiom
|
02-18-20, 11:03 PM
(This post was last modified: 02-20-20 11:31 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Rv220 and b175m together on axiom
Hello i installed twin dv220 transducers with an axiom (not pro)9
And the sonar depth finder is not able to read bottom at over 5mph So i am hoping to add a b175m and a sonar module 470 hopefully improve my depth finding ability and depth range. The question i have is With the 470 installed, will i be able to run the twin 220 transducer at same time i run the b175 with my non pro axiom 9? |
|||
02-20-20, 11:30 AM
Post: #2
|
|||
|
|||
RE: [CA11] Rv220 and b175m together on axiom
Welcome to the Raymarine Forum a7ewizard ,
Q1. If I add the CP470 chirp module and run a B175L transducer, can I run and split screen views of both the RV-100 high chirp and the B175 low chirp simultaneously? A1. Yes. Q2. If that works, I assume I could also split screen the other sonar modes with the B175L chirp. A2. Correct. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)