Raymarine forum / Raymarine Forums / Autopilots v / [TG] [TG11] how to correct depth on E series Plotter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] how to correct depth on E series Plotter
05-27-20, 07:45 AM (This post was last modified: 06-01-20 11:20 PM by Tom - Raymarine - Moderator.)
Post: #1
obx Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2018
Reputation: 0
[TG11] how to correct depth on E series Plotter
My E series Hybrid depth is always wrong, normally showing 300-5000 ft depth when I'm only in 12-50ft of water. is there a way to correct this or re-calibrate?
Find all posts by this user
Quote this message in a reply
06-01-20, 11:23 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] how to correct depth on E series Plotter
Hello obx,

Can you send us some images of your Fishfinder page, so that we can see what data it is that that incorrect reading is being gathered from?
There's lots of info on the background behind incorrect sounder operation or poor performance at https://forum.raymarine.com/showthread.php?tid=9371

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication