Raymarine forum / Raymarine Forums / Multifunction Displays v / Transducer compatibility?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer compatibility?
10-27-16, 10:00 PM
Post: #1
wejohns Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2016
Reputation: 0
Transducer compatibility?
New to this site, was directed here from THT by CME, hope I can get some help.
I replaced a c80 coupled with a DSM250 with a e80/ DSM300 connected together with eternet cable. I am getting a no signal message when using the sounder. I know it was functioning with the older system. Will a thru hull transducer used with the DSM250 work with a DSM300? I so any suggestions as to what to check, beyond the connections since I have checked and re-checked those several times?
Find all posts by this user
Quote this message in a reply
10-28-16, 08:45 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Transducer compatibility?
Welcome to the Raymarine Forum wejohns,

Transducers which had been designed for use with a DSM250 would indeed be compatible with a DSM300. Please click here to view a FAQ addressing how to troubleshoot communications issues between a DSM30/300 and an E-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication