Raymarine forum / Raymarine Forums / Fishfinders v / [CA] cable compatibility between units

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] cable compatibility between units
12-12-17, 01:04 PM (This post was last modified: 12-13-17 08:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
scott4fish Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2017
Reputation: 0
[CA] cable compatibility between units
I have three dragonfly 5 fishfinders on my boat. Two do not have gps. The third and new one does-- 5 Pro. I bought the 5 pro to use as a stand alone gps unit to replace a garmin gps. I could have bought Dragonfly 5M which is a stand alone gps. But for the money, I now have spare transducer and mounting hardware with the 5-pro. I didn't know the transducer and power cable on the 5-pro are molded into one and cannot be separated. I want to purchase a 5M power cable to use on 5 Pro but don't about compatibility. Any help? Thanks.
Find all posts by this user
Quote this message in a reply
12-13-17, 09:09 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] cable compatibility between units
Welcome to the Raymarine Forum Scott,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the R70376 Dragonfly 5M Power Cable would indeed be applicable to supporting the end which you are seeking.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication