[TG] Two displays - sharing AIS and charts?
|
01-08-18, 05:15 PM
(This post was last modified: 01-08-18 09:45 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG] Two displays - sharing AIS and charts?
Hello:
I have two Raymarine MFD's on board my yacht, one is a C-80 and the other a C-70. They are both connected to the SeaTalk network. Both units show all the transducer information (wind, compass, depth etc) fine. Can I share one chart onto the two displays, or do I need two separate charts? Thanks IcarusBop |
|||
01-08-18, 09:48 PM
Post: #2
|
|||
|
|||
RE: [TG] Two displays - sharing AIS and charts?
Good day IcarusBop,
C-series Classic were designed as single-station displays and have no capability to share graphical information such as charts, radar or sounder/fishfinder. The displays of that era that could do that were the E-series Classic (E80, E120). You will need separate charts in your C80 and C70. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
01-09-18, 04:39 AM
(This post was last modified: 01-09-18 02:55 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [TG] Two displays - sharing AIS and charts?
That's what I suspected - never mind, thanks very much for your response.
|
|||
01-10-18, 09:38 AM
Post: #4
|
|||
|
|||
RE: [TG] Two displays - sharing AIS and charts?
You're welcome.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)