Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST8001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST8001
05-30-18, 11:30 PM (This post was last modified: 06-01-18 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
Eirinnrose Offline
Junior Member
**
 		Posts: 31
Joined: Dec 2016
Reputation: 0
[CA11] ST8001
I have an ST8001 linked in through Sea Talk. When I turn the knob to change direction a few degrees, it will jump 10-15 degrees and sometimes go in the opposite direction. Can these be repaired or is the ST8001 too old?
Find all posts by this user
Quote this message in a reply
06-01-18, 08:51 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST8001
Welcome to the Raymarine Forum Eirinnrose,

Unfortunately, Raymarine's Product Repair Centers can no longer service ST6xxx, ST6xxx+, ST7xxx, ST7xxx+, ST8xxx, or ST8xxx+ Autopilot Control Head. Depending upon the model of autopilot course computer which is installed onboard the boat, it may be possible to replace the autopilot control head with a p70RS Autopilot Control Head. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication