[DG] [DG11] Ev1 sensor core Cable

[Hotdog7]

Can I use blue backbone cable going from 5 way block to the t piece then connect white spur cable from the piece to ev1 sensor core? Or do I have to run spur cable from 5 way block to ev1 sensor core?

[Derek - Raymarine - Moderator]

Hi HotDog7
Thank you for your enquiry.

The suggestion you have made is correct, remove the blue terminator from the 5 way block, plug a new backbone cable in to that blue socket and then use a T piece at the end, refit the blue terminator into the empty blue socket in the T piece and then use a spur cable to the EV1.

Thanks
Derek