Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Radar Clearance

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar Clearance
05-19-19, 05:05 AM (This post was last modified: 05-21-19 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
WWMS Offline
Member
***
 		Posts: 54
Joined: Feb 2016
Reputation: 0
[CA11] Radar Clearance
Is there a vertical clearance requirement where an open array radar passes over a spotlight? Thank you.
Find all posts by this user
Quote this message in a reply
05-21-19, 01:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Radar Clearance
Q. Is there a vertical clearance requirement where an open array radar passes over a spotlight?
A. Negative. However, if seeking maximum performance of the radar system, the radar transducer will be mounted above such objects. Third party radome and open array pedestal mounts are available in the marketplace to permit the radome or pedestal to be mounted sufficiently high enough to allow the beam of the radar transducer to pass over nearby objects. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
05-21-19, 05:42 PM
Post: #3
WWMS Offline
Member
***
 		Posts: 54
Joined: Feb 2016
Reputation: 0
RE: [CA11] Radar Clearance
Thank you Chuck. Have a great holiday weekend.
Find all posts by this user
Quote this message in a reply
05-22-19, 02:56 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Radar Clearance
You're welcome and you as well.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication