[LW] [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?

[mmosberg]

Hello from Norway :-)

I have a MFD eS 128 in my boat. There are 2x Volvo Penta KAD300 engines in the boat and I have successfully installed one YDES04 J1708 gateway pr engine, attached them to the backbone and displays the live engine data on my eS 128. See attached picture.

Is there a way to make the eS 128 calculate consumption and present it as liter/nm?

[Louise - Raymarine - Moderator]

Dear mmosberg,

Thank you for your query.

The eS128 can show fuel used by the following means using the PGN127497;

-distance per volume
-volume per distance
-litres per 100km

For full information and instruction on setting this up, please refer to Chapter 11.1 on P122 of the Lighthouse 2 maunual, this is available to download here.

Many Thanks
Louse

[mmosberg]

Thanks a ton

[Louise - Raymarine - Moderator]

You are welcome.