Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] SPX-5 computer compatible with control ST6001+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SPX-5 computer compatible with control ST6001+
06-26-19, 04:31 AM (This post was last modified: 06-26-19 02:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
Johnsen Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2019
Reputation: 0
[CA11] SPX-5 computer compatible with control ST6001+
Hi

Can I use control head ST6001+ along with a SPX-5 computer and a wheel drive?

regards
John
Find all posts by this user
Quote this message in a reply
06-26-19, 02:59 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] SPX-5 computer compatible with control ST6001+
Welcome to the Raymarine Forum John,

Indeed, a ST600x, ST700x, or ST800x autopilot control head may be used with SPX autopilot course computers. When using one of these autopilot control heads, the autopilot control head must be directly interfaced to and powered by the autopilot course computer's SeaTalk port.
Find all posts by this user
Quote this message in a reply
06-27-19, 06:43 AM
Post: #3
Johnsen Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2019
Reputation: 0
RE: [CA11] SPX-5 computer compatible with control ST6001+
Thank you for good support!

Regards
John
Find all posts by this user
Quote this message in a reply
06-27-19, 09:06 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] SPX-5 computer compatible with control ST6001+
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication