Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV150 connection to Seastar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV150 connection to Seastar
12-31-19, 04:20 PM (This post was last modified: 01-02-20 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
michaelcorwin Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2016
Reputation: 0
[CA11] EV150 connection to Seastar
Raymarine support,

I'm connecting the hydraulic pump for my EV150 autopilot to my Seastar system with power steering. My pump states the fittings on it are BSP (I assume BSPP) and my Seastar system hoses have 3/8″ compression fittings which utilize a 9/16″-24 extra fine thread. Does Raymarine make an appropriate adapter? If not how can I get my system working?

Thank you,
Mike Corwin
Find all posts by this user
Quote this message in a reply
01-02-20, 10:10 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV150 connection to Seastar
Welcome to the Raymarine Forum Mike,

You will need to obtain hydraulic hoses from Seastar. These will feature NPT threads which may in turn be adapted to BSB threads via Raymarine's M81187 RAYPILOT BSP TO NPT ADAPTORS.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication