European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[CA] [CA11] Is it possible to link axiom 9 ff with dv220 and b175
/
[CA] [CA11] Is it possible to link axiom 9 ff with dv220 and b175
|
[CA] [CA11] Is it possible to link axiom 9 ff with dv220 and b175
|
|
02-14-20, 04:56 PM
(This post was last modified: 02-18-20 10:10 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] Is it possible to link axiom 9 ff with dv220 and b175
Hi, Hames here. Thanks for your advice. I have to throughhull dv220 transducers installed on my boat; because of limited positioning on bottom of boat a little to much disturbance doesn't allow for good bottom readings at speed.
Therefor i was thinking of installing a b175m transducer with 470 transducer module to improve preformance and depth range. Was wondering with this setup if i could have both the 220 for side an down imaging run the same time as the b175? |
|||
|
|
02-18-20, 10:16 AM
Post: #2
|
|||
|
|||
|
RE: [CA11] Is it possible to link axiom 9 ff with dv220 and b175
Welcome to the Raymarine Forum JammanJ,
Q. Was wondering with this setup if i could have both the 220 for side an down imaging run the same time as the b175? A. Yes. As DownVision and SideVision transducer elements chirp across a 60kHz range centered on 350kHz and the B175M chirps across a 60kHz range centered on 100kHz, they should be able to operate without interfering with one another. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)