Raymarine forum / Raymarine Forums / Instruments v / replacing ST60 with i60

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
replacing ST60 with i60
06-07-16, 08:16 PM
Post: #1
bartonk1 Offline
Junior Member
**
 		Posts: 6
Joined: Jun 2016
Reputation: 0
replacing ST60 with i60
I currently have an ST60 installed, and I'm considering upgrading to an i60 to interface with my new eS98 MFD (which I am preparing to install).

Question: do I need to replace the masthead transducer and the cable going down the mast in order to use the i60?

Appreciate any advice - thanks!
Find all posts by this user
Quote this message in a reply
06-09-16, 12:51 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: replacing ST60 with i60
Welcome to the Raymarine Forum bartonk1,

The i60 Wind Instrument was designed to support the same wind transducer that the ST60 Wind Instrument had been designed to support. Accordingly the wind transducers leads may simply be unplugged from the ST60 Wind Instrument and then plugged into the corresponding color coded terminals of the i60 Wind Instrument.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication