Raymarine forum / Raymarine Forums / Product Selection Assistance v / [TG] [TG11] adaptor plate from es98 to axiom pro 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] adaptor plate from es98 to axiom pro 9
03-22-20, 12:07 AM (This post was last modified: 03-24-20 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
Offshore Offline
Junior Member
**
 		Posts: 10
Joined: May 2017
Reputation: 0
[TG11] adaptor plate from es98 to axiom pro 9
Does raymarine make an adapter plate for surface mount going from es98 to axiom 9.

Thank you
Find all posts by this user
Quote this message in a reply
03-24-20, 01:35 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: adaptor plate from es98 to axiom pro 9
Hello Offshore,

No, we don't make that adaptor plate. This is because we expect that most people replacing eS displays will go to Axiom Pro, which has the same cutout and fit, very similar cosmetics and functionality, and the same power cable. Axiom (non-Pro) is smaller and uses a different power cable, making the upgrade less straightforward.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication