Raymarine forum / Raymarine Forums / Multifunction Displays v / offset

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
offset
02-05-17, 07:57 AM
Post: #1
Bad Bait Bill Offline
Junior Member
**
 		Posts: 12
Joined: Feb 2016
Reputation: 0
offset
I am using the offset on my A128 to compensate for the lake level being down from full (normal) pool. This works great right now but is limited to 9.9 feet. Is there some way to increase the offset to a higher number. eg: If the lake is down 15 feet.
Find all posts by this user
Quote this message in a reply
02-06-17, 04:21 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: offset
Welcome to the Raymarine Forum Bill,

Which offset are you referring to (i.e. where in the MFD's menu is the offset which you are referring to)?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication