Raymarine forum / Raymarine Forums / Fishfinders v / What transducers may be mated directly to the Axiom MFDs?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What transducers may be mated directly to the Axiom MFDs?
02-28-17, 12:22 PM (This post was last modified: 04-16-18 09:39 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
What transducers may be mated directly to the Axiom MFDs?
Which transducers may be mated directly to the Axiom MFDs?

To view detailed information and examples concerning the types of transducers which may be used by the internal fishfinder sounder circuitry of Axiom DV and Axiom RV MFDs, please see the attached Axiom Sonar Options PDF file.

Note. If a Y-Cable is installed, but not connected to each of the intended types of transducers, then NO FISHFINDER FEATURES WILL BE SUPPORTED by the MFD. Accordingly, if the MFD is only going to be interfaced to one type of compatible transducer, then the corresponding Adapter Cable rather than a Y-Cable should be installed.


RAYFAQ#


Attached File(s)
.pdf  AXIOM Sonar Options.pdf (Size: 1.3 MB / Downloads: 6284)
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication