Raymarine forum / Raymarine Forums / AIS v / Extending a passive GPS antenna cable

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Extending a passive GPS antenna cable
05-01-17, 09:00 AM
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Extending a passive GPS antenna cable
Extending a passive GPS antenna cable

Unfortunately, Raymarine no longer offers the E36011 10m Passive GPS Antenna Extension Cable (applications include AIS950, AIS650, AIS500, RC435, RN300, and RC320). If seeking to extend the cable of a passive GPS antenna, it is recommended that a cable extension up to 10m constructed from commonly available marine grade RG58 grade cable and that it be terminated with TNC connectors (one male and one female). It is also possible that some third party marine electronics manufacturers may offer extension cables terminated with these connectors.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication