Raymarine forum / Raymarine Forums / Multifunction Displays v / Splice digital tach to chartplotter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Splice digital tach to chartplotter
11-21-17, 01:10 AM
Post: #1
donkelley Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2017
Reputation: 0
Splice digital tach to chartplotter
I have had installed in the pilothouse two third party (Aetna Engineering) digital tachometers running from each of my Cummins 330 diesel engines. Can the wires be tapped to supply RPM data to my C-140 widescreen chartplotter and thence, via the ng backbone, to my new Raymarine ng instruments on the flybridge?
Find all posts by this user
Quote this message in a reply
11-21-17, 08:58 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Splice digital tach to chartplotter
Welcome to the Raymarine Forum Don,

It is not possible to directly connect such devices to Raymarine products. Please click here to view a FAQ addressing how engines systems may be interfaced to a C-Series Widescreen MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication