Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] transducer selection
03-16-18, 02:09 PM (This post was last modified: 03-16-18 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] transducer selection
Might you be able to assist with the proper selection of a digital transducer for a 45 foot sail boat FRP hull. I was hoping to use a triducer DST and connect into a STng network. I see the A22154 with a wide cone and the A22111. I am planning to use an I70 I60 P70 and E97..

perhaps you can steer me in the right direction

thanks as always

David
Find all posts by this user
Quote this message in a reply
03-16-18, 04:01 PM
Post: #2
RE: [CA] transducer selection
Welcome to the Raymarine Forum David,

Are you seek a transducer to support the MFD's fishfinder features, or are you simply seeking transducer to supply supplying these system with numerical depth, speed, and temperature data?
Find all posts by this user
Quote this message in a reply
03-16-18, 09:51 PM (This post was last modified: 03-19-18 08:08 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] transducer selection
I need to supply data to the instruments I70 for speed depth and temp..not looking for fish data or sonar

I do want to be able to see the speed depth temp on the E97
Find all posts by this user
Quote this message in a reply
03-19-18, 08:24 AM
Post: #4
RE: [CA] transducer selection
David,

Should you you simply seeking a transducer to supply supplying these system with numerical depth, speed, and temperature data, then the A22111 DST800 SMART Triducer may be used for this purpose.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)