[JB] [JB11] No radar overlay with Q2 Doppler and e97

[tonyiiiafl]

When I had the Quantum dome I had a radar overlay. Now with the Q2 w/Doppler I do not. Couple of questions:
1) How do I determine what level of Lighthouse I have?
2) Will this work with Navionics Platinum +?
3) I do not see how there is a place to turn on Doppler on my display
4) I also do not see how to acquire a target

Your help would be appreciated!

[Jacob - Raymarine - Moderator]

Hello Tonyiiiafl,

To answer your questions please refer to my responses below.

Q1) How do I determine what level of Lighthouse I have?
A1) Please click here to view a FAQ addressing this subject.


2) Will this work with Navionics Platinum +?
A2) Yes, if the MFD has been updated with LightHouse II v19.03 software. Please click here to view a FAQ addressing this subject.

Q3) I do not see how there is a place to turn on Doppler on my display
A3. Unfortunately, doppler capabilities are only available on axiom model MultifunctionaDisplays running the light house 3 software.

Q4) I also do not see how to acquire a target
A4) Please click [url= http://forum.raymarine.com/showthread.php?tid=2887]here[/url] to view a thread in which we had previously this subject.

[tonyiiiafl]

Where do I find the update for Lighthouse 19.3? I was unable to locate?

Thank you!

[Jacob - Raymarine - Moderator]

Tonyiiiafl,

Unfortunately there is no light house II 19.3 software, but the lighthouse II 19.03 software can be found at the Raymarine website under the software section. Below is a link to the software page pertaining to e series Multi-Functional Displays.

Please click here