Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] M232 Ball Down and ClearCruise

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M232 Ball Down and ClearCruise
11-18-19, 06:41 PM (This post was last modified: 11-19-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
SVAzzurra Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2017
Reputation: 0
[CA11] M232 Ball Down and ClearCruise
We have just purchased the M232 and getting ready to install. I would prefer a ball down installation on our mast (sailboat with ScanStrut Camera Mount) I have seen the following statement on the web "ClearCruiseâ„¢ is not available on ball-down installations" It is not a current concern as we have not upgraded to Axiom (Lighthouse III) but it is planned for the future, We currently have c and e MFD's. Will there be a software patch in the future to address this?

Tony Castagno
SV Azzurra
Find all posts by this user
Quote this message in a reply
11-19-19, 11:08 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] M232 Ball Down and ClearCruise
Welcome to the Raymarine Forum SVAzzurra,

Thanks for your interest in the M232 Thermal Camera. Unfortunately at this time, the M232 will only support ClearCruise when mounted in the ball up orientation. A feature request has been logged to consider the changes necessary to support ClearCruise in conjunction with the M232 when the camera has been installed in the ball down orientation.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication